Scanner; Accessories; Connecting The Scanning Cable; Plugging The Scanner Into The Laptop - Planmeca Emerald User Manual

Scanner

Accessories

The Emerald system has a set of removable components.
• Scanning Tip
• Scanning Cable
• Cradle
• Color Balancer
• Laptop
• Mouse

Connecting the Scanning Cable

1
To connect the scanner cable, align the notch on the cable to the small notch on the back of the scanner.
2
Push the cable in and turn clockwise until the notch on the cable is aligned with the larger notch on the back of
the scanner.
3
Keep the scanner connected to the cable at all times. Remove the cable from the scanner only when directed by
Customer Support or when replacing the cable.

Plugging the Scanner into the Laptop

Insert the USB-C cable into the laptop. Make sure it's the USB connection with the power indicator.
Pull the USB connector from the laptop when the scanner is not in use. You do not need to "eject" the USB device from
Windows. Do not pull on the cable to disconnect. Bending or twisting the cable may impact system usability.
15698200.B Introduction 5