Mitsubishi Electric 800 Series Hardware Instruction Manual page 145

5
Ready bit status selection (Pr.349, N240)
• The status of Ready bit in communication data can be selected when a communication option (FR-A8ND, or FR-A8NF) is
installed.
Setting
Pr.349 N010 N240
0 0 0
1 1 0
100 0 1
101 1 1
*1 When 24 V external power is available for control circuit or power is input only to control circuit.
• FR-A8ND
Class 0x29 instance 1
Attribute
Access Name
ID
9 Get Ready
• FR-A8NF
Inverter status monitor
Bit Name
READY
14 Reset cancel
signal
Communication reset selection
NET operation mode
Reset enabled Reset enabled
Reset enabled Reset disabled
Reset enabled Reset enabled
Reset enabled Reset disabled
Data Number of Initial
type data bytes value
BOOL 1 1
Pr.349 = "0 or 1"
N240 = "0"
Pr.349 = "100 or 101"
N240 = "1"
Description
Other than NET
Main circuit: power-ON
operation mode
Ready bit: ON
Ready bit: ON
Ready bit: ON
Ready bit: ON
Range
0 Other than the below
Pr.349 = "0 or 1"
N240 = "0"
1
Pr.349 = "100 or 101"
N240 = "1"
Description
0: During an inverter reset / during startup after power-ON.
1: During normal operation
0: RY signal is OFF
1: RT signal is ON
8
Ready bit status selection
Main circuit: power-
Ready bit: ON
Ready bit: ON
Ready bit: OFF
Ready bit: OFF
Description
During stop / during acceleration / during
constant speed operation / during deceleration /
during reverse rotation deceleration
During stop while the RY signal is ON / during
acceleration / during constant speed operation /
during deceleration / during reverse rotation
deceleration
BCN-C22005-860
*1
OFF