Download  Print this page

Mitsubishi Electric 800 Series Hardware Instruction Manual Page 29

Separated converter type.
Hide thumbs

Advertisement

Cooling system
Natural ventilation (enclosed
type / open type)
Natural
Natural ventilation (totally
enclosed type)
Heat sink cooling
Forced ventilation
Forced air
Heat pipe
28
2. INSTALLATION AND WIRING
2.3 Installation of the inverter and enclosure design
Enclosure structure
This system is low in cost and generally used, but the
enclosure size increases as the inverter capacity
INV
increases. This system is for relatively small capacities.
Being a totally enclosed type, this system is the most
appropriate for hostile environment having dust, dirt, oil
mist, etc. The enclosure size increases depending on
INV
the inverter capacity.
This system has restrictions on the heat sink mounting
Heat sink
position and area. This system is for relatively small
INV
capacities.
This system is for general indoor installation. This is
appropriate for enclosure downsizing and cost
INV
reduction, and often used.
Heat
This system is a totally enclosed type, and is
pipe
appropriate for enclosure downsizing.
INV
Comment

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric 800 Series

Comments to this Manuals

Symbols: 0
Latest comments: