Table of Contents
Advertisement
3.1.3.4 Batteries switching off and their status control
The batteries should be switched off each time before the long-term storage of
the radiometer. Do this as follows:
- switch the radiometer off;
- open the lid of the battery compartment;
- remove the batteries;
- examine the battery compartment, check the contact clamps accuracy, clean the
battery compartment from contamination and contact clamps from oxides;
- make sure there is no humidity, no salt spots on the surface of the batteries, and
no damages of the insulated coating.
3.2 Verification of the radiometer
The radiometers should be verified after manufacture, repair or during use
(periodically, at least once a year).
3.2.1 Verification operations
During verification, the operations presented in Table 3.2 should be performed.
100
Advertisement
Table of Contents
