Preparation Of The Radiometer For Operation - ECOTEST STORA-TU RKS-01 Operating Manual

Gamma, beta radiometer-dosimeter

Table of Contents

2.2 Preparation of the radiometer for operation

2.2.1 Scope and order of external examination

2.2.1.1 Before using the radiometer, unpack it and check if the delivery kit is

complete. Examine for mechanical damages.

2.2.2 Rules and order of examination for operational readiness

2.2.2.1 Study the operating manual before putting the radiometer into operation.

2.2.2.2 Open the battery compartment and make sure the two batteries are inserted,

connections are reliable, and there is no leakage of salts after durable storage of the

radiometer. In case there is a salt leakage, remove the batteries. Clean them, if possible,

or replace, if not. Insert the batteries and close the battery compartment.

2.2.3 Guidelines on switching on and testing the radiometer

2.2.3.1 Press shortly the MODE button to switch the radiometer on. The radiometer

sends a short audio signal. The radiometer enters the mode of photon-ionizing radiation

DER measurement, which is shown by "γ" symbol and "µSv/h" dimension of the

measured quantity.

Note. If the low battery indication appears on the LCD (see 2.3.3.6), replace the

batteries.

Table of Contents