ECOTEST STORA-TU RKS-01 Operating Manual page 100

Note. "+" means the operation is applicable for this type of TM; "-" means the
operation is not applicable.
3.1.2 Safety measures
TM safety measures fully comply with safety measures stated in item 2.3.1 of
the present OM.
3.1.3 Maintenance procedure of the radiometer
3.1.3.1 External examination
External examination of the radiometer should be performed in the following
order:
а) check the technical condition of surface, inspect for integrity of seals, absence of
scratches, traces of corrosion, surface damage of the radiometer;
b) check the condition of clamps in the battery compartment.
3.1.3.2 Delivery kit completeness check
Check if the delivery kit is complete according to Table 1.2.
3.1.3.3 Operability check of the radiometer
3.1.3.3.1 Operability check of the radiometer is performed according to item
2.2.3 of the present OM.
98