Table of Contents
Advertisement
To cancel clearing, shortly press the THRESHOLD button or do not press the
buttons during 30 s (the radiometer will automatically enter the mode of
measurement results viewing stored in the nonvolatile memory).
To confirm clearing of the measurement results stored in the nonvolatile
memory, shortly press the MODE button. The "CLr" symbols that blink three times
on the LCD of the radiometer, and return of the radiometer to the mode of photon-
ionizing radiation DER measurement mean that the values have been cleared.
Caution! If the submode of clearing of measurement results stored in the
nonvolatile memory is paused for more than 30 s (the user presses no buttons of the
radiometer), the radiometer will automatically return to the mode of measurement
results viewing without measurement results clearing.
96
Advertisement
Table of Contents
