2.3.3.9 The mode of alarm clock
This mode can be entered from any other operating mode of the radiometer
with the help of a short press of the MODE button. This mode follows the mode of
clock.
In the mode of alarm clock the radiometer's LCD displays the following
information (Figure 23):
- alarm clock symbol (1) (if the alarm clock is on);
- battery status symbol (2);
- time of the alarm clock activation (3);
- current time (4).
To proceed to the submode of alarm clock activation time programming, press
and hold the THRESHOLD button until a stripe (1) "moving" across the
instantaneous value indicator appears on the LCD, and the minute digits of alarm
clock activation (2) start blinking (Figure 24).
78