ECOTEST STORA-TU RKS-01 Operating Manual page 88

Gamma, beta radiometer-dosimeter

Table of Contents

If the connection failed to be established or data communications failed to be

performed with the PC (for instance, the PC is off, located beyond the reach of the

Bluetooth-interface of the radiometer, or the custom-made software is not launched

on this PC), the radiometer is searching for the PC with a Bluetooth name starting

with the "CHECKPOINT" symbols. If such PC is found, an attempt is made to

establish connection and perform data communications with the PC.

In case of a successful connection with the PC and data communications start,

the LCD of the radiometer displays a stripe (1) (Figure 27) "moving" across the

instantaneous value indicator.

During the data communications the radiometer sends to the PC the

measurement results that have been saved in the nonvolatile memory. During the

data communications you can also clear the measurement results saved in the

nonvolatile memory. After that the radiometer's clock will be set according to the

PC clock.

Table of Contents