Audi AMB Service Manual page 88

ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
Fig. 119: Reversing Position Of Counterhold 10-201 To Loosen/Tighten Bolts
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Reverse position of counterhold 10-201 to loosen/tighten bolts.

Mark position of flywheel relative to engine.

Unbolt and remove flywheel.

Installing
Install in reverse order, paying attention to the following:
Replace bolts.

Component
Dual-mass flywheel to crankshaft: Bolt length 22.5
mm Bolt length 35.0 mm Bolt length 43.0 mm
Sealing flange to cylinder block
* 90 ° is one quarter turn
*Replace bolts
* 180 ° is one half turn
Drive plate
Special tools, testers and auxiliary items required
2005 Audi A4 Quattro
60 + 90 [degrees]
1:00:59 AM Page 76
Nm
* See note
60 + 180 [degrees]
note * See note
60 + 180 [degrees]
* See note
10
* See