Audi AMB Service Manual page 82

ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
5 - Gasket
Replace

6 - Cylinder block
Removing and installing crankshaft --> Crankshaft, removing and installing

Disassembling and assembling pistons and connecting rods --> Pistons and connecting rods,

disassembling and assembling
7 - Securing bolt for dual-mass flywheel/drive plate
Replace

Tightening torque for dual-mass flywheel: 60 Nm + 1/2 turn (180 ° ) further

Tightening torque for drive plate (vehicles with automatic transmission): 60 Nm + 1/4 turn (90 ° ) further

8 - Dual-mass flywheel/drive plate
Removing and installing dual-mass flywheel --> Dual-mass flywheel/drive plate, removing and

installing
Removing and installing drive plate

9 - Intermediate plate
Must be located on dowel sleeves

Do not damage/bend when installing

10 - 10 Nm
11 - Rear sealing flange
With oil seal

Remove oil pan to remove and install --> Oil pan, removing and installing

Replace only as complete assembly

12 - Oil seal
Replacing --> Crankshaft oil seal - pulley end, replacing

13 - Intermediate shaft
Axial clearance max. 0.25 mm

14 - O-ring
2005 Audi A4 Quattro
1:00:58 AM Page 70