Audi AMB Service Manual page 423

ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
Fig. 124: Identifying Drive Plate, Grooved Washer And New Bolt
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Remove drive plate again and correct value by installing with/without shim - 2 -. Tighten bolts to 30 Nm

again.
Measure distance again.

If measured value matches specification:
Install new bolts and tighten.

Tightening torque
Component
Drive plate to crankshaft
* 90 ° is one quarter turn
CRANKSHAFT, REMOVING AND INSTALLING
Crankshaft, removing and installing
NOTE:
Before removing crankshaft, provide suitable support to ensure that

sensor wheel ( - 6 - ) is not damaged.
When working on engine, secure it to engine stand using engine bracket

VW540 --> Engine, securing to repair stand.
2005 Audi A4 Quattro
2:33:17 AM
60 + 90 ° * See note
Page 46
Nm