Audi AMB Service Manual page 395

ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
Carefully engage in center section of toothed belt guard when installing

5 - Toothed belt
Mark direction of rotation with chalk or felt-tip pen before removing

Check for wear

Removing --> Toothed drive belt, removing, installing and tensioning

Installing (adjusting valve timing)

6 - Idler wheel
7 - 27 Nm
8 - 65 Nm
Use counterhold 3036 to loosen and tighten

9 - Camshaft sprocket
For exhaust camshaft

To remove and install first remove toothed belt --> Toothed drive belt, removing, installing and

tensioning
Installed position Installed position of camshaft sprocket

10 - Tensioning roller
11 - Washer
12 - Toothed belt tensioner
13 - O-ring
Replace

Coat with coolant G 012 A8 D before installing

14 - Coolant pump
Removing and installing --> Coolant pump, removing and installing

15 - 15 Nm
16 - Crankshaft toothed belt sprocket
Contact surface between toothed belt sprocket and crankshaft must be free of oil

Removing and installing Removing and installing crankshaft toothed belt sprocket

2005 Audi A4 Quattro
2:33:16 AM Page 18