Audi AMB Service Manual page 38

ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
Attach transmission support 3147 to support bar 10-222A.

Use support bar 10-222A to lift engine/transmission assembly until engine mount bolts are positioned

approx. 1 cm above engine supports.
Remove engine/transmission connecting bolts accessible from below.

Remove upper engine/transmission securing bolts. Leave one bolt hand-tight in place.

Fig. 49: Attaching Lifting Tackle 2024A To Engine And Hook Onto Workshop Crane VAG1202A
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Attach lifting tackle 2024A to engine and hook onto workshop crane VAG1202A.

NOTE:
To balance the center of gravity of the assembly, position hole rails of

hook attachments as shown in the illustration.
CAUTION: Hook attachments and locating pins on lifting tackle must be secured with
locking pins - arrows - in illustration.
Remove last securing bolt.

NOTE:
Check that all hoses and other connections between engine and body

have been removed.
Lift engine over studs of engine mounts.

Loosen support bar 10-222A slightly.

Vehicles with automatic transmission
2005 Audi A4 Quattro
1:00:56 AM Page 26