Audi AMB Service Manual page 482

ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
Fig. 205: First And Sixteenth Drive Chain Rollers Installed On Chain Gears
Courtesy of VOLKSWAGEN UNITED STATES, INC.
If new chain is installed, distance between notches - A - and - B - on camshafts must be 16 rollers on

chain. Illustration shows exact positions of 1st and 16th rollers on sprockets.
Notch - A - is offset slightly toward inside in relation to chain roller - 1 -

Insert camshaft adjuster between drive chain (2 technicians needed).

Locate camshafts together with drive chain and camshaft adjuster in cylinder head.

Oil running surfaces of both camshafts.

NOTE:
Dowel sleeves for bearing caps and camshaft adjuster must be installed in

cylinder head.
When installing bearing caps ensure that identification mark is readable

from intake side of cylinder head.
Tighten mountings of camshaft adjuster (watch position of dowel sleeves).

Fig. 206: Identifying Bearing Cap Positions
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Tighten bearing caps 2 and 4 of intake and exhaust camshafts alternately in diagonal sequence (watch

position of dowel sleeves).
Install both bearing caps on intake and exhaust camshaft chain sprockets.

Check correct setting of camshafts:

2005 Audi A4 Quattro
2:34:43 AM Page 45