Table of Contents
Advertisement
Fig. 16: Releasing Timing Belt Tension
Courtesy of AUDI OF AMERICA, INC.
16. To release tension from timing belt, loosen nut on pulley and rotate eccentric bolt clockwise in direction
of arrow using special tool (3387). See Fig. 16 . Remove timing belt.
Removal (Cabriolet)
1. Loosen bolts or quick release fasteners (1 and 2). See Fig. 17 . The rear noise insulation quick-release
fasteners (3) remain installed. The quick-release fasteners remain in the bumper cover (1).
2. Loosen the wheel housing liners on left and right at front. Pull the wheel housing liner back. Remove the
bolt (2) and nuts (1). See Fig. 18 . Unclip bumper extension from catch (B).
3. Remove bolts and tilt front grille slightly forward and pull it out in an upward direction from bumper
cover. Remove bolts (1-8) and pull side extensions out of guide piece. See Fig. 19 . Pull bumper cover
forward slightly.
4. If equipped, disconnect hose for headlight washer unit. Disconnect connector(s) and remove bumper
cover from vehicle.
2005 Audi A4 Quattro
AUDI 1.8L 4-Cylinder Turbo - AMB Engine - 2002-04 A4
12:44:06 AM
Page 18
Hide quick links:
Advertisement
Table of Contents
