Audi AMB Service Manual page 469

ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
Fig. 180: Camshaft Gear Retaining Bolt Installed Into Camshaft To Stop
Courtesy of VOLKSWAGEN UNITED STATES, INC.
To guide oil seal extractor, screw bolt for camshaft sprocket - arrow - into camshaft as far as it will go by

hand.
Remove inner part of oil seal extractor 2085 two turns (approx. 3 mm) out of outer part and lock with

knurled screw.
Fig. 181: Positioning And Screwing Bolt Into Oil Seal As Far As Possible With Forced Pressure
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Lubricate threaded head of oil seal extractor 2085 , place in position and exerting firm pressure screw as

far as possible into oil seal.
Loosen knurled screw and turn inner part against camshaft until oil seal is pulled out.

Clamp flats of oil seal extractor in vise. Remove oil seal with pliers.

Installing
NOTE:
Do not oil sealing lip of oil seal.

2005 Audi A4 Quattro
2:34:42 AM Page 32