Audi AMB Service Manual page 157

ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
Hammer jammed valve keepers on all five valves loose using a plastic hammer.

Exhaust side
Fig. 215: Screwing Snap-In Device VAS5161/6 With Attaching Fork VAS5161/4 Onto Stud On Cylinder
Head
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Screw snap-in device VAS5161/6 with attaching fork VAS5161/4 onto stud on cylinder head.

Push guide bushing VAS5161/14 as far as it will go into valve lifter guide on valve to be removed.

Installed position: Checkered areas must be at right angle to direction of travel

Push knurled spacer ring VAS5161/17 onto cartridge VAS5161/8.

Push cartridge into guide bushing.

Attach pressure fork VAS5161/2 to snap-in device VAS5161/6 and press cartridge downward.

Simultaneously, turn knurled screw of cartridge clockwise until ends engage in valve keepers.

Move knurled screw back and forth slightly so that valve keepers are pressed apart and taken up into

cartridge.
Release pressure fork.

Remove cartridge with spacer ring, guide bushing, valve head and valve spring.

Intake side
2005 Audi A4 Quattro
1:01:06 AM Page 145