Audi AMB Service Manual page 50

ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
Install in reverse order, paying attention to the following:
Bolt lock carrier to longitudinal member (50 Nm) and to fenders (10 Nm).

Fig. 64: Bolt Lock Carrier To Longitudinal Member And To Fenders
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Allow stop for torque reaction support to rest on rubber buffer for torque reaction support under its own

weight, and tighten bolts - arrows - to 28 Nm.
Install front bumper: -->

63 BUMPER

63 - BUMPERS for CABRIOLET

Adjust headlights: --> 94 LIGHTS, SWITCHES - EXTERIOR

Tightening torques
Component
Lock carrier to
Torque reaction support stop to lock carrier
Ribbed belt for generator, vane pump and air conditioner compressor
NOTE:
Mark direction of the ribbed belt with chalk or felt-tip pen prior to removal.

Running a used belt in the opposite direction could destroy it. When
installing the belt, make sure it is properly seated on pulleys.
2005 Audi A4 Quattro
longitudinal member
1:00:56 AM Page 38
Nm
50
fender 10
28