ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
Fig. 113: Screwing Phillips-Head Bolt From 3083 Into Crankshaft
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Before installing oil seal extractor, screw Phillips-head bolt from 3083 into crankshaft as far as it will go.
Remove inner part of oil seal extractor 2085 two turns (approx. 3 mm) out of outer part and lock with
knurled screw.
Fig. 114: Identifying Seal Puller 2085
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Lubricate threaded head of oil seal extractor, place in position and exerting firm pressure, screw as far as
possible into oil seal.
Loosen knurled screw and turn inner part against crankshaft until oil seal is pulled out.
Clamp flats of oil seal extractor in vise. Remove oil seal with pliers.
Clean contact surface and sealing surface.
Installing
NOTE:
Do not oil sealing lip of oil seal.
2005 Audi A4 Quattro
1:00:59 AM
Page 73