Audi AMB Service Manual page 87

ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
Fig. 117: Removing Crankshaft Toothed Belt Sprocket
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Install crankshaft toothed belt sprocket. To do so, hold sprocket in position with counterhold 3415.

NOTE:
Contact surface between toothed belt sprocket and crankshaft must be

free of oil.
Do not oil bolt for crankshaft toothed belt sprocket.

Install toothed belt (adjust valve timing).

Install ribbed belt and ribbed belt tensioner.

Install lock carrier --> Lock carrier, moving to service position.

Tightening torque
Component
Toothed belt sprocket to crankshaft
*Replace bolt
* 90 ° is a quarter turn
Dual-mass flywheel/drive plate, removing and installing
Dual-mass flywheel
Special tools, testers and auxiliary items required
Fig. 118: Counterhold 10-201
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Counterhold 10-201

Removing
2005 Audi A4 Quattro
1:00:59 AM Page 75
Nm
90 + 90 ° * See note