Maintenance
How to Replace Peltola Coaxial-Cable Connectors
Replacement of the Peltola coaxial-cable connectors requires special tools and techniques; only experienced
maintenance personnel should attempt to remove or replace these connectors. We recommend that the damaged
cable be replaced as a unit. For cable part numbers, see Section 7, Replaceable Mechanical Parts. An
alternative solution is to refer the replacement of the defective connector to your local Tektronix Field Office or
representative. Figure 3-3 shows the parts of a Peltola coaxial cable connector assembly.
3-10
m
SOCKET
RECEPTACLE
HOLE
SOCKET
HOLE
7391-306
Figure 3-3. Peltola Coaxial Cable Connector Assembly.
11A52 Extended Service Manual