Table of Contents
Advertisement
03/2006
10.7.6
Print graph
Printer settingsThe printer selection screen is called up by pressing the
HMI\Printer selection soft keys (Fig. 10-20).
Use the toggle key to select whether the displayed graphics are to be sent di-
rectly to the printer by activating the Print graphs soft key, or output it in a bit-
map file instead.
Fig. 10-20 Basic screen for printer selection
Output directly to
The printer must be set up under MS WINDOWS.
printer
You can set "Print" in the printing options.
Upon activation of the Print graphs soft key in the "Display" screen, the dis-
played graphics are printed on the active printer.
Output as
If you want to save the graph to a bitmap file (*.bmp), proceed as follows:
bitmap file
Set "Output as bitmap file" in the selection field for the printer setting.
When you press the Print graph soft key on the "Display" screen, the screen for
entering a file name appears (Fig. 10-21). Enter a new name in the drop-down
list or select an existing file name for overwriting.
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
10 Drive Optimization
10.7 Trace function
10-215
10
Advertisement
Table of Contents
