Siemens SINUMERIK 840D Simodrive 611 digital Startup Manual page 210

Table of Contents

Advertisement

10 Drive Optimization
10.7 Trace function
X marker soft key
2nd X marker
soft key
Zoom X soft key
Full screen
soft key
Trace 1 ... soft key
Print bit graph
soft key
10-210
Vertical soft keys under Color settings:
Save:
Current color settings are accepted without exiting
the screen.
Cancel:
Exits the screen without saving the changes to the color
settings.
OK
Accepts the current color settings and exits the screen
Click on Cancel or OK to return. The 10-track view of the trace is displayed
once more, as shown in Fig. 10-17.
A vertical marker is added to the bit graph. It can be moved along the time axis
using Cursor Left/Right, e.g. to the start of an "interesting" signal occurrence.
The time at the marker position and the measured value interpreted as a num-
ber is displayed in the header over track 0.
The soft key is used to toggle between On and Off. If X marker Off is activated,
then the marker is deleted once more,
A second vertical marker of a different color is added to the bit graph. It can be
moved along the time axis using Cursor Left/Right, e.g. to the end of an
"interesting" signal occurrence. The soft key is used to toggle and switches to
the other market if pressed again.
If 2 markers are used to describe a time interval, the size is displayed as delta t:
...ms in the footer. The 4th vertical soft key switches to "Zoom X".
The interval between the markers is extended to the full width of the available
display area. The "X marker On" soft key is available once more in the zoomed
image. This allows another marker to be set in the extended view.
The "Zoom X" soft key has the same effect as for trace mix.
This soft key is used to return from a zoomed view to the original view of the
signal curve.
The 7th vertical soft key is used to switch from trace 1 to trace 4 and Trace Mix
one after the other.
The function works in the same way as "Print graph" for bit graphs. See also
subsection 10.7.6.
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
© Siemens AG 2006 All Rights Reserved
03/2006

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 810d simodrive 611 digital

Table of Contents