Panasonic MINAS A6 Series Reference Specifications page 16

[3] Size E of 200 V system
Connector Terminal
pin No. symbol
5 L1
4 L2
3 L3
XA
2 L1C
1 L2C
4 P
3 RB
XC
2 B
1 N
3 U
XB 2 V
1 W
* Tighten the earth screws M4 with the 0.7-0.8 Nm torque respectively.
Name
Main power supply
200 V
input
Control power
200 V
supply input
 Normally, short out the circuit between RB and B.
 When a trip happens due to a regenerative load protection error, open the
Regen resistor circuit between RB and B and connect an external regenerative resistor
connection
(prepared by customer) between P and B.
Then, specify the external regenerative resistor for parameter Pr0. 16.
 Do not connect N terminal.
Connect each phase of the motor winding.
Motor connection
U: U phase V: V phase W: W phase
Earth Earth terminal for grounding
Description
3 phase 200 - 240 V
Single phase 200 - 240 V
Motor Business Unit, Panasonic Corporation
No. SX-DSV03015 - 13 -
+ 10 %
50/60 Hz input
- 15 %
+ 10 %
50/60 Hz input
- 15 %