List Of Peripheral Devices Applicable To Servo Driver - Panasonic MINAS A6 Series Reference Specifications

9-4 List of peripheral devices applicable to servo driver

Voltage Power capacity
Servo driver
spec (Rated current)
Single
MADL*01**
Approx.
phase
0.4 kVA
MADL*11**
100 V
Single/
MADL*05**
Approx.
3 phase
0.5 kVA
MADL*15**
200 V
Single
MBDL*21**
Approx.
phase
0.5 kVA
100 V
Single/
MBDL*25**
Approx.
3 phase
0.9 kVA
200 V
Single
MCDL*31**
Approx.
phase
0.9 kVA
100 V
Single/
MCDL*35**
Approx.
3 phase
1.3 kVA
200 V
MDDL*45**
Approx.
1.8 kVA
Single/
3 phase
MDDL*55**
200 V
Approx.
2.3 kVA
MEDL*83**
Approx.
3.8 kVA
MEDL*93**
MFDL*A3**
3phase Approx.
200 V 4.5 kVA
MFDL*B3**
Approx.
7.5 kVA
 Select the specification common to single/ 3 phase 200 V according to the power supply.
 To become compliant with European EC directive, make sure to connect a circuit breaker compliant with
IEC standard and UL certification (marked with LISTED) between the power supply and the noise filter.
- Please!

Select a circuit breaker and a noise filter with the capacity comparable to the power capacity
(by taking into account the load condition).

Terminal block and earth terminal
For wiring, use the copper conductor cable of the temperature rating 75deg. Celsius or more.
For the protection earth terminal, use M4 for Sizes A-E, M5 for Sizes F.
The terminal block can be damaged if the screw tightening torque exceeds the maximum value.
(See the page for explanation of terminal blocks.)
Electromagnetic
contactor
Circuit breaker
(Rated current/
(Rated current)
Released heat
current)
10 A
20 A
15 A
30 A 20 A
60 A 30 A
100 A 50 A
Noise filter Surge absorber
DV0P4170
(for single
phase)
/
DV0PM20042
/
RTHN-5010
DV0P4190
(for single phase)
/
DV0P1450
（for 3 phase）
DV0PM20042
/
RTHN-5010
DV0P4220
/
RTHN-5030
DV0PM20043
/
RTHN-5050
DV0P1450
DV0P3410
/
RTHN-5050
Motor Business Unit, Panasonic Corporation
No. SX-DSV03015 - 53 -
Noise filter for signals
Power Motor
cable cable
DV0P
1460
DV0P DV0P
1460 1460
RJ8035