YASKAWA DX200 Instructions Manual page 78

TouchSense, AccuFast,
and AccuFast II with Macro
Jobs
Table 6-3: Argument Settings R1Circle
Argument Name Description
Circle Diameter Diameter of circle being searched. The value of
this argument should be set to as close to the
actual diameter of the curved surface as possible
in order to provide for accurate qualification of the
maximum shift value.
XY=1:XZ=2:YZ=3 Searching Plane circle is on.
Rapid Input # Select rapid input to be used.
6 R1 CIRCLE: Circle Touch Routine
6.4 Interface
6-6
Default Allowable Setting Range
Setting
0 minimum of 1
0 1,2 or 3
0 1-5
166153-1CD
166153-1CD
78 of 124