Festo Compact Performance CPV Series Manual page 28

1. Installation
1
Load voltage connec
tion for CPV valves
Fig. 1/8: 24 V DC load voltage connection
1−16
Current consumption depends on the type of valve coil.
Please refer to the manual "Pneumatics, P.BE−CPV−..." for the
values.
Recommendation:
Include an EMERGENCY STOP function in the load voltage
S
circuit for the CPV valves (pin 2).
Check the 24 V load voltage while the system is operat
S
ing. Make sure that the load voltage lies within the per
mitted tolerances, even under full operating conditions.
Please note
Check to see if additional pressure switch−off is required
for your machine/system in the case of an EMERGENCY
STOP.
1
Festo P.BE−CP−SD8−...−EN en 0503b