Pitney Bowes DM Series Setup Manual page 7

Reference - How to configure a static IP address
DM110i/DM160i/
DM220i series
1. Press Options.
2. Press Page Down twice.
3. Select Connect - Data Centre.
4. Select LAN Settings.
5. Select Get IP.
6. Select Manually.
7. Select IP Address/IP Addr. Key in your static IP address.
Press Enter or Accept to confirm the new setting.
NOTE: Key in the complete IP address, including the decimal
points separating the IP address parts. If one or more sections
contain less than 3 digits, use zeros to fill. e.g. 192.168.1.25
should be entered as 192.168.001.025.
8. Select Subnet Mask/Subnet. Key in your subnet mask
settings in the same way as the IP address. Press Enter or
Accept to confirm.
9. Select Default Gateway/Gateway. Key in your default gateway
in the same way as the IP address above. Press Enter or
Accept to confirm.
10. If requested, press Enter again to confirm the settings.
11. Press the Home key to exit the setup menu.
SDC876F Pitney Bowes DM Series LAN Connectivity Guide
DM300c/
DM400c
and DM300M/
DM400M
series
1. Press Options/Menu.
2. Press Page Down twice.
3. Select Data Centre Options.
4. Press Page Down.
5. Select Network Settings.
6. Select Get IP.
7. Select Specify Address Manually.
8. Select IP, then press C to clear the existing entry. Key in your static IP
address. Press Enter or Accept to confirm the new setting.
NOTE: Key in the complete IP address, including the decimal points
separating the IP address parts. If one or more sections contain less
than 3 digits, use zeros to fill. e.g. 192.168.1.25 should be entered as
192.168.001.025.
9. Select Subnet Mask/Subnet, then, press C to clear the existing entry.
Key in your subnet mask settings in the same way as the IP address.
Press Enter or Accept to confirm.
10. Select Default Gateway/ Gateway, then, press C to clear the existing
entry. Key in your default gateway in the same way as the IP address
above. Press Enter or Accept to confirm.
11. If requested, press Enter again to confirm the settings.
12. Press the Home key to exit the setup menu.
DM475/
DM475M/
DM450 series
only
<< Return to Contents
UK