Setting DISPLAY CONTRAST
If you still don't have operating access when starting operation work, the release procedure is
Operating ac-
automatically called up.
cess
Perform the following steps to set the display contrast:
Setting display
contrast
Step
Setting BUZZER VOLUME
If you still don't have operating access when starting operation work, the release procedure is
Operating ac-
automatically called up.
cess
Perform the following steps to set the volume of the terminal buzzer:
Setting buzzer
volume
Step
Building Technologies
Fire Safety
System functions
Action
Press softkey
1
<Operate..>
Press softkey
2
<Settings..>
Press softkey
3
<Increase display contrast>
- or -
< Decrease display contrast >
Action
Press softkey
1
<Operate..>
Press softkey
2
<Settings..>
Press softkey
3
<Increase buzzer intensity>
- or -
< Decrease buzzer intensity >
Operating instructions Œ•Ž
Result / Comment
The main menu appears on the display.
The sub-menu is displayed.
No execution message, but the contrast
is increased or decreased by one stage
each time the button is pressed.
Repeat this step until the display contrast
you want is reached.
Result / Comment
The main menu appears on the display.
The sub-menu is displayed.
No execution message, but the volume
is increased or decreased by one stage
each time the button is pressed.
Repeat this step until the volume you
want is reached.
A6V10225450_b_en_--
73
2017.09.07