Organization Of The Read.hex File; Organization Of The Read.hx1 File; Functions With The Psion Operating System - Siemens MOBY series User Manual

Expanded Functions
6.2.3

Organization of the READ.HEX File

The READ_x.HEX file only contains the pure data which also exist on the MDS.
The length of the file is the same as that of the MDS, specified in bytes.
6.2.4

Organization of the READ.HX1 File

The READ_x.HX1 file contains the ID number. The READ_x.HX1 file is only
created for MOBY D/E/F/U.
6.3

Functions with the PSION Operating System

You can use the FILE/EXIT menu command to access the operating system
level of the hard-held terminal. We will now describe some of the functions
which are available with the PSION operating system.
S Simple writing of a batch file to copy MDS data to a memory card (e.g., on
drive B:).
S Generation and modification of an AUTOEXEC file to change the time for au-
tomatic switch-off or the time for the backlight to save battery power and thus
increase operating time for one battery charge. The AUTOEXEC file is lo-
cated in directory A:\BTF\Autoexec.btf.
S Edit the read MOBY data with the PSION editor. Remember that this editor
can only be used when the MDS data are in ASCII format.
S Spread sheet function
S Calculator
S Execution of DOS commands
See the manual entitled "PSION Workabout USER GUIDE" for a detailed de-
scription of operating system functions and standard programs. This manual
can be ordered from PSION. See appendix A.1.
E-56
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.1-7418
R 01.04