Switching Alarm Devices Off/On - Siemens AlgoPilot B3Q661 Operating Instructions Manual

Switching ALARM DEVICES OFF/ON

If you still don't have operating access when starting operation work, the release procedure is
Operating ac-
automatically called up.
cess
The alarm devices of all assigned area scan be switched OFF or ON using a separate button.
Switching OFF
alarm devices
using function Perform the following steps to switch off the alarm devices:
key
Step
When you press the <Alarm device off> button, the alarm devices of all assigned areas are
switched off immediately.
Perform the following steps to switch ON the alarm devices of all assigned areas:
Switching ON
alarm devices
using function
key
Step
38
Building Technologies
Fire Safety
Action
Œ
1
Press button
<Alarm device off>
Action
Œ
1
Press button
<Alarm device off>
Alarms Faults
Alarm device Alarm device
active fault
Remote alarm Remote transmission
active fault
Alarm delay System
off fault
Operating instructions Œ•Ž
Result / Comment
· 'Implementing ...' message
•
·
LED lights up
Result / Comment
· 'Implementing ...' message
•
·
LED goes out
2
1
Alarm device
off
Remote alarm
off
Detector
test mode
Information
Premises
manned
System
on
A6V10225450_b_en_--
2017.09.07