printer
· The printer (if installed) normally runs in active readiness.
When does the
· It is only switched off in exceptional circumstances, e.g. to change the paper, or during test or
printer have to
maintenance work.
be switched
· The printer can be switched ON and OFF via the menu.
OFF?
· The 'OFF' status is indicated on the display.
Lamp test
To test that all indicators (LEDs), the display and the alarm buzzer are functioning correctly.
What is the pur-
pose of the
All the terminal's optical and acoustic devices are activated for a few seconds.
'Lamp test'?
The lamp test is accessed via the station menu.
Accessing the
lamp test
Time and date
· The time and date do not normally need correcting.
· The time and date are set by the service engineer when the system is installed.
· The system automatically switches between summer and winter time.
· The time and date are shown on the display when setting.
· The time and date also appear on the standby display.
124
Building Technologies
Fire Safety
System functions
Basic system information &
A6V10225450_b_en_--
2017.09.07