Siemens AlgoPilot B3Q661 Operating Instructions Manual page 16

Search methods,
Three different addresses can be used:
Direct access
· CSX number
via address
· Plan number
· Zone/address
This method can only be used if you know the address you need. For example, it can be indicated
on the display, stated on the detectors or read out of the level plans.
The availability of address information on the display can be configured by the service engineer.
A zone is to be switched off: It's CSX number is 01/003/006/001.
Example
1. You go to the direct access menu needed by pressing the following softkeys:
2. The CSX number must be entered in response to the following message:
Input CSX no.
AA/SSS/ZZZ/EEE
01/003/006/___
3. Once the input is complete, press the
all the functions available appear on the display.
4. Now continue by selecting the
We would recommend using this method when there is a message indicating an abnormal status
Direct access
in one of the 4 message categories (alarm, fault, Isolation, Information).
using message
This is the fastest access method.
A switched off zone is to be switched on. It has produced a message of the 'Switch-off' category:
Example
1. Use the <Isolation> button to select this message (you may need to scroll down if there are
several messages).
2. Select
play.
3. The zone can now be switched on by selecting the
<Zone -> ON>
16
Building Technologies
Fire Safety
continued
<Enter LOGICAL ADDRESS (CSX)..>
(The cursor moves automatically
v
each time a number is entered.)
<Zone -> OFF>
<Functions for sel. message..>
softkeys.
<Operate..>
t
<Direct access..>
t
softkey or press <3>. The node selected and
<Jump to>
and softkeys.
<OFF>
softkey: All the functions available appear on the dis-
Operating instructions Œ•Ž
<ON/OFF functions..>
A6V10225450_b_en_--
2017.09.07
and