Siemens AlgoPilot B3Q661 Operating Instructions Manual page 67

REPLACING AlgoRex DEVICE,
The command is available at element level. This command switches back on the supply to the
line to which the element selected is connected. The corresponding message disappears.
Replace device -
The command also automatically sets all associated zones to 'Test condition' operating mode.
> Off operating
mode
Perform the following steps to reset one individual detector to 'Normal operation' operating
mode:
Step
· Once this command has been executed, the message
NOTE
appears.
· The new data is merged at the station and the zone put into test mode.
· Once the test condition has been completed, the zone must be reset to normal operation us-
ing the 'Zone -> Test condition off' command.
· The message disappears as soon as the service engineer has transferred the modified data
by uploading to AlgoWorks.
Building Technologies
Fire Safety
Action
Press button <Information>
1
Select manual call point in
2
'Replace device' operating mode
Press softkey
3
<Functions for sel. message..>
Press softkey
4
<More functions..>
Press softkey
5
<Device replace mode -> OFF>
continued
Result / Comment
Use the scroll keys on the display
Implementation messages
'Implementing ...'
'Implemented'
Change in hardware configurationin
Operating instructions Œ•Ž
- and -
A6V10225450_b_en_--
2017.09.07
67