Siemens AlgoPilot B3Q661 Operating Instructions Manual page 33

Switching ALL ZONES in a SECTION OFF/ON,
You can use this command to switch ON all the detectors in a section. Perform the following
Switching ON
allzones in a steps:
section
Step
NOTE:
Perform the following steps if not all the zones in the section in question have been switched
OFF:
Step
Building Technologies
Fire Safety
Action
Press button <Isolation>
1
Use the scroll keys on the display to
2
select Select section messages
(section in which all zones are to be
switched ON)
Press softkey
3
<Functions for sel. message..>
Press softkey
4
<DETECTOR zone functions..>
Press softkey
5
<All DETECTOR zones -> ON>
Action
Press button <Isolation>
1
Use the scroll keys on the display to
2
select one of the detector zones to
switch ON
Press softkey
3
<Functions for sel. message..>
Press softkey
4
<Select SECTION->
Press softkey
5
<DETECTOR zone functions..>
Press softkey
6
<DETECTOR zones
ON/OFF functions..>
Press softkey
7
<All DETECTOR zones -> ON>
Operating instructions Œ•Ž
continued
Result / Comment
Isolation messages are displayed
The section selected has a dark
background.
NOTE:
This section message only exists if all
zones in this section are switched
OFF.
The sub-menu is displayed.
Implementation messages
'Implementing ...'
'Implemented'
Result / Comment
Isolation messages are displayed
The zone selected is displayed in-
versely
The SECTIONS menu is displayed
The sub-menu is displayed.
The sub-menu is displayed.
Implementation messages
'Implementing ...'
'Implemented'
A6V10225450_b_en_--
- and -
- and -
33
2017.09.07