Common Faults; Hardware Connection Faults Or Other Faults - Huawei ES3000 V5 User Manual

ES3000 V5 SAS SSD
User Guide
Procedure
Step 1 Log in to the OS as an administrator or a member in the administrator group.
Step 2 Run the following command to query the SMART information of the SSD controller (such as
sda):
hioadm info -d sda –s
The command output is similar to the following:
[root@localhost tool]# hioadm info -d sda -s
critical warning
composite temperature
available spare
available spare threshold
percentage used
data units read
data units written
host read commands
host write commands
controller busy time
power cycles
power on hours
unsafe shutdowns
media and data integrity errors: 0
number of error information log entries: 0
warning composite temperature time: 0 min
critical composite temperature time: 0 min
data status
Step 3 The percentage used parameter displays the used lifespan percentage of the SSD.
If the value of percentage used exceeds 100%, the SSD lifespan has expired, and Huawei's
warranty service is unavailable. You need to back up data on the SSD as soon as possible and
replace the SSD.
----End

5.7 Common Faults

5.7.1 Hardware Connection Faults or Other Faults

Hardware connection faults are mostly identified by indicators. If the yellow indicator of a
device is on and the green indicator is off 30 seconds after a new drive is installed or during
proper operating, hardware faults occur. See
Status Descriptions
Typical fault causes are as follows:
l
l
l
Issue 06 (2019-03-19)
to identify the faults.
The drive is not securely installed.
The drive is installed in a non-SAS slot.
A drive hardware port fault occurs.
Copyright © Huawei Technologies Co., Ltd.
: no warning
: 308 degrees Kelvin (35 degrees Celsius)
: 100%
: 10%
: 0%
: 68.8 MB
: 0.0 MB
: 17748
: 0
: 0 mins
: 89 times
: 1164 h
: 35 times
: OK
5.8 Indicator Status Descriptions5.8 Indicator
5 Maintenance and Upgrade
56