Fig. 5.14: Quartus Ii Compiler Launching; Fig. 5.15: Quartus Ii Compiling Summary - Caen V1495 Technical Information Manual

Document type: Title:
User's Manual (MUT) Mod. V1495 General Purpose VME Board
In order to generate a new programmation file it is necessary to launch the compiler, by
clicking on the red "play" button on the tool bar.
Quartus at this point launches in sequence the steps of the flow chart (synthesis, fitting,
place&route), then shows the correct compiling and the following screen:
At this point an updated RBF file is generated in the project directory. This file can be
used for updating the firmware as described in § 5.7.
NPO:
00117/04:V1495.MUTx/08

Fig. 5.14: Quartus II compiler launching

Fig. 5.15: Quartus II compiling summary

Filename:
V1495_REV8.DOC
Revision date: Revision:
12/02/2010 8
Number of pages:
42
Page:
41