Station Number" - Siemens SIMATIC S5 ET 200U Manual

ET 200U(DP Standard): AddressAssignm.,Starting–Up, DiagnosingFaultsUsing COM ET 200

"Station Number"

An ET 200U(DP Standard) must have a station number only in the range
from 3 to 124. You cannot enter the station number of an additional active
station here (if you specified one in the ET 200 SYSTEM PARAMETERS
screen).
When pressing <F7> (HELP) – the cursor must be positioned in the "station
number" field – a window is displayed showing all station numbers and sta-
tion types assigned so far. You can select a station and output its configura-
tion. If station numbers have not been assigned yet, the message NO STA-
TIONS CONFIGURED is output.
4. If necessary, correct the station number that appears on the screen and
Result: If the station whose number you entered has already been config-
ured, its configuration appears on the screen after you complete your entry.
If the station whose number you entered has not already been configured, two
additional entry fields appear:
Program file selected: TEST@@@@ET.200
CONFIGURING
Station number: 3
F1 F2
Figure 5-2 ET 200U(DP Standard): CONFIGURING screen (2)
ET 200U Distributed I/O Station
EWA 4NEB 812 6087–02b
press <F6> (ENTER) to complete your entry.
Area: Station type:
F3 F4 F5
SIMATIC S5 / COM ET 200
F6 F7 F8
ENTER HELP EXIT
5-5