The Im 318–C - Siemens SIMATIC S5 ET 200U Manual

ET 200U(DP Standard/FMS):
Modes, Settings and Communications Ca-
pabilities of the IM 318–C
In this Chapter This chapter describes the following:
For Reference
Please refer to
Prerequisites for We assume that you have already gained experience regarding PROFIBUS
this Chapter
connectivity.
This chapter presupposes that you are already familiar with the following
standards and protocol profile:
ET 200U Distributed I/O Station
EWA 4NEB 812 6087–02b
Modes of the IM 318–C ( Section 6.1)
Modes of the IM 318–C ( Section 6.2)
Communications capabilities of the IM 318–C via PROFIBUS
( Section 6.3)
Diagnosing faults using the display elements (
Example of programming a link between the ET 200U(FMS) and the CP
5431 FMS ( Section 6.5)
Explanation of the terms used in the glossary (
Section 6.3.2 for the structure of the object list (Table 6-6)
Section 6.3.3 for the list of communication links
PROFIBUS standard DIN 19245, Parts 1 and 2
Sensors/actuators profile
6
Section 6.4)
Appendix B)
6-1