ABB RELION REX640 Engineering Manual page 96

Section 5
Protection and control engineering
88
GUID-6A730CD0-A390-4B3A-AF97-E69E323D75F4 V1 EN
Figure 66: Opening the Fault Record tool
• To close the Fault Record tool, click the Close button in the tool.
The Fault Record tool runs in the same process as PCM600 but in a separate
window. Multiple instances of the tool can be run at the same time. Any open tool
instances are closed without confirmation when PCM600 is closed.
The Fault Record tool is a connectivity package tool. The main functionality is divided
into three parts: reading the fault record parameters from the protection relay,
displaying their names, values and units on the user interface and saving them to a text
file. It is also possible to clear all the fault records from both the tool and the protection
relay and copy the fault records either individually or all at once to a word processor.
1MRS759117 A
REX640
Engineering Manual