Managing Bus Bar Coloring - ABB RELION REX640 Engineering Manual

Section 6
LHMI engineering
6.1.6.2
116
GUID-9E5EB0D4-75BF-48E1-8D75-033A62F42A5B V1 EN
Figure 96: Adding a bus bar
2. Select the left or right connection point and drag it to increase the size of the bus
bar.

Managing bus bar coloring

Bus bar coloring is used to assign a color to a bus bar or links. New bus bar color
groups can be created and each color group can have one or more logic conditions;
each logic condition is associated with one color.
• Apply the bus bar coloring.
1. Right-click anywhere on the page and select Show Bus Bar Coloring.
2. In the SLD Logic Window dialog, click + to add a new color group or x to
remove an existing color group.
3. Expand any color group and click + to add IF and ELSE conditions and x
to remove them.
4. Click ... to add another And condition inline. Click And to change or
remove the condition.
5. To add a value for a condition, click Value Button, select any signal value
or widget property value and press ENTER.
6. Select any color from the drop-down list.
7. Select Color Group and click on any bus bar to apply the coloring.
1MRS759117 A
REX640
Engineering Manual