Saving Event Filter Configuration; Alarm Configuration; Alarm List; Elevating Events To Alarms - ABB RELION REX640 Engineering Manual

1MRS759117 A
6.2.3
6.3
6.3.1
6.3.1.1
REX640
Engineering Manual
GUID-32B7373E-6895-4799-BA38-0F7898322C27 V1 EN
Figure 107: Read-only events are dimmed

Saving event filter configuration

• Save the event filter configuration in one of the alternative ways.
• On the File menu, select Save.
• Click Save on the toolbar.
The Save button on the toolbar is activated when the configuration is
modified.

Alarm configuration

The HMI supports two alarm handling approaches.
•

Alarm list

• Programmable LEDs
The alarm list approach uses event configuration to elevate an event to an alarm. The
programmable LEDs approach is similar to the traditional programmable LEDs where
instead of a physical LED, a virtual LED user interface element is used.
Alarm list
Any visible event can be configured as an alarm. HMI Event Filtering in PCM600 is
used to configure the event visibility on the LHMI and WHMI. See
of HMI events.

Elevating events to alarms

Alarm configuration is done in the HMI Alarm and Fault Selection view. Any visible
events can be elevated to an alarm or priority alarm. An alarm configuration text can
also be added to describe the alarm context.
Section 6
LHMI engineering
Setting visibility
127