ABB RELION REX640 Engineering Manual page 105

1MRS759117 A
REX640
Engineering Manual
Adding and removing measurements
1. In Page Editor, select the Measurements page and then select a measurement
list by clicking it.
2. In the Object Properties pane, click ... on the listId row to browse the available
signals.
GUID-5DFE94FB-94AC-4164-93A7-39954AEAC4E9 V1 EN
Figure 73: Accessing the signals
3. In the Signal Group Selection dialog, select check boxes to add the required
signals or clear them to remove any unused signals.
Section 6
LHMI engineering
97