Symbol Editor; Symbols - ABB RELION REX640 Engineering Manual

Section 6
LHMI engineering
6.1.5
6.1.5.1
108
When a group is created, all the individual widget properties such as the widget
name followed by the dot and the property name, are shown in the Object
Properties pane. Only properties x and y are common for all the widgets in the
group.
The widget group property naming (aliases), visibility and read-only can be
modified.
The grouped widgets can be ungrouped by right-clicking the group and selecting
Ungroup.
• Bind the widget property values to the same or to another widget property values
or to signal values from the application configuration function.
It is possible to specify simple if...else conditions. The property values are then
changed based on those conditions.
For example, the LED color can be changed to red if the signal value is high or to
green if button2 is checked. Otherwise the LED color is yellow.
GUID-77CF95D9-429A-4FCB-99B3-79FD4B34E1C6 V1 EN
Figure 87: Binding property data

Symbol Editor

Symbol Editor is used to create symbols for a single-line diagram. It has different
drawing tools available such as line, rectangle and ellipse to draw the symbols. These
symbols can be saved in .svg format and written to the IED. This is displayed on the
LHMI.

Symbols

Symbols are used in the single-line diagram. Each symbol has at least one state that
represents the graphics of a symbol at different positions.
Symbol Editor supports three types of symbol standards. New symbols can only be
created under the custom standard.
1MRS759117 A
REX640
Engineering Manual