Section 3 Reu611 Standardized Configuration; Standardized Configuration - ABB Relion Applications Manual

1MRS758335 B
Section 3
3.1
REU611
Application Manual
REU611 standardized configuration

Standardized configuration

REU611 is available in one configuration.
To increase the user-friendliness of the configuration and to emphasize the simplicity
of usage of the relay, only the application-specific parameters need setting within the
relay's intended area of application.
The standard signal configuration can be altered by local HMI, Web HMI or optional
application functionality of Protection and Control IED Manager PCM600.
Table 9: Standardized configuration
Description
Voltage and frequency protection
Table 10: Supported functions
Function
Protection
Residual overvoltage protection
Three-phase undervoltage protection
Three-phase overvoltage protection
Positive-sequence undervoltage protection
Negative-sequence overvoltage protection
Frequency protection
Master trip
Control
Circuit-breaker control
Condition monitoring and supervision
Trip circuit supervision
Logging
Disturbance recorder
Fault recorder
Measurement
Three-phase voltage measurement
Sequence voltage measurement
Residual voltage measurement
Table continues on next page
REU611 standardized configuration
IEC 61850
Section 3
Conf.
A
A
ROVPTOV 3
PHPTUV 3
PHPTOV 3
PSPTUV 2
NSPTOV 2
FRPFRQ 2
TRPPTRC 2
CBXCBR 1
TCSSCBR 2
RDRE 1
FLTRFRC 1
VMMXU 2
VSMSQI 1
RESVMMXU 1
25