Accessories; Schick 33/Elite Usb Interface Holder; Figure 19. Schick 33/Elite Usb Interface And Holder - Dentsply Sirona Schick 33 User Manual

11. Accessories

11.1. Schick 33/Elite USB Interface Holder

11.1.1. Wall-Mounting Option (with Fasteners)
IMPORTANT! When following the wall-mounting option, choose a location for the holder where there
are no electrical wires or connections that could be contacted accidentally when drilling.
Schick USB Module and Sensors
The Schick 33/Elite USB Interface holder is designed for easy access
to, and storage of, the USB Interface. Several mounting options are
available: (1) Wall-mounted with fastening hardware, or (2) Attached to
a wall or other acceptable bonding surface with Velcro adhesive. When
installing your USB Interface choose a location that offers easy access
and visibility during patient exams.

Figure 19. Schick 33/Elite USB Interface and Holder

Perform the following steps to install the holder by fastening it with
the supplied hardware to a wall or other flat surface:
1. Remove the Schick 33/Elite USB Interface from the holder.
2. Position the holder on a smooth stable flat surface. Using the
holes on the back of the holder as guides, fasten the holder
securely to the wall using two (#4) dry wall screws (supplied)
or other hardware appropriate to the mounting surface.
3. Snap the Schick 33/Elite USB Interface into the holder with
the LEDs facing outward.
100003870 Rev. 4
65