Table 5. Proper Sensor Removal from Sheath (AimRight Adhesive System)
E
XAMPLES
NOTE: Additional information regarding Sensor usage can be found in the Sensor Care Guide, available
from the schickbysirona.com website.
16
1. Keeping the Sensor attached to the
positioning tab, grasp the aiming bar where
it joins the Sensor and begin pushing the
distal end of the Sensor out of the sheath.
2. As the Sensor is pushed into the wider area
of the sheath, gently slide the sheath away
from the Sensor.
3. Be careful to prevent the Sensor from
falling on the floor.
100003870 Rev. 4
A
CTIONS
Schick USB Module and Sensors