Using The Upgrade Utility; Introduction - Dentsply Sirona Schick 33 User Manual

7. Using the Upgrade Utility

7.1.

Introduction

7.1.1. Upgrade Utility Names
Schick USB Module and Sensors
The upgrade utility is installed during the Driver setup program and
can be used to accomplish the following tasks:
 Perform USB Interface tests (Section 7.2 on page 51)
 Perform Sensor Pattern tests (Section 7.3 on page 52)
 Perform USB Interface firmware upgrades (Section 7.4 on
page 53)
 Perform Sensor Module firmware upgrades (Section 7.5 on
page 54)
 Display corrective actions for low voltage and other system
conditions (Section B-2 on page 77).
When used with Schick 33/Elite USB Interfaces the upgrade utility is
called the Schick 33/Elite Utility. This name appears at the top of
the dialog window when a Schick 33/Elite USB Interface is connected
and several small graphics representing the connected hardware are
displayed along with their current firmware versions. (See Figure 17 on
page 50.)
In cases where no Schick interfaces are connected or detected, the title
will simply display a more generic name: "Upgrade Utility."
100003870 Rev. 4
49