Figure 7. User Profile Menu Selections - Dentsply Sirona Schick 33 User Manual

5.4.4. How to Edit a Task
Schick USB Module and Sensors
1. In the Zoom window, right-click on an image acquired with a
Schick 33 Sensor.
2. Click on the Select User menu item.
3. Select a user name from the list.
Note: The [default] name is not editable. To create your own custom profile, add a
user name and then perform the following steps.
4. Right-click on the image again and click on the Select Task.
5. Choose one of the task categories from the list.
6. Adjust the slider to a level of Sharpening that you feel is
appropriate.
7. Click on the Save as default button.
8. When prompted, click Yes to save the new the Sharpen value
as the default setting for this task category and this user.
9. To check or compare the Sharpen settings with other user
profiles or default values, click on Edit User, which opens the
user profile dialog.

Figure 7. User Profile Menu Selections

(Shown expanded at right)
100003870 Rev. 4
35